Solutions

If you are looking for a high pressure waterblasting unit, All Jetting works with many waterjetting pump OEMs.

Waterjet pumps are ideal for the daily demand of industrial facilities, contractors and equipment operators. Choose from diesel and electric units with psi ratings from 3,500 to 55,000 psi and available in DOT-compliant and skid formatted configurations. These water blasting pumps deliver optimal productivity and reliability. We know your job is depending on a water blast pump that will keep you on schedule.

All Jetting can help you find the hydroblasting pump configuration and accessories that are best suited for your surface preparation project.

Our Jetstream Style water blast replacement parts will increase your profit. All Jetting manufactures quality parts at a substantial savings.

Ultra high pressure Jetstream compatible parts that we manufacture are:

JetlanceTornado style backup rings

Tornado compatible swivel seals

Fluid end packings, #6, #7, #8

UHPX sapphire nozzles and a variety of hydro blast sapphire nozzles

Our 40K and 55K FLOW waterjet compatible replacement parts are precision machined to the highest waterjetting standards. The high quality of our waterblasting products can help prevent downtimes and delays while ensuring your water blasting pump operations run smoothly.

We have the following FLOW compatible products available to work with Husky™ pumps:

• 40k and 55k Check Valve Parts
• 40k and 55k ECV parts
• 40k and 55k Fluid End parts
• A-3000 compatible Jetlance parts

Our safety gear is designed specifically to prevent injuries caused by accidental swipes from the intense power of Ultra High Pressure (UHP) Waterjetting.

TurtleSkin WaterArmor is the ultimate UHP personal protective equipment, offering lightweight water blasting protection up to 40,000 psi (2800 bar) without sacrificing operator flexibility. The adjustable, modular panel design of the safety gear allows for single-piece replacement of chaps, gaiters, torso, and arm panels.

The Turtleskin waterjet protective equipment uses a modular design and pieces are sold separately so you buy only what you need. Chaps, Gaiters, and Arm Protection are sold individually. Protect your employees from injury from high pressure waterjet exposure.

Waterjetting is not easy work, the unique Turtle Skin design provides circulation to the user while also offering hydroblasting protection. The chaps have built-in cushioned knee pads that protect the knees from ultra-high pressure jet streams and reduce discomfort when kneeling on hard surfaces. The Turtle Skin technology reduces fatigue and increases productivity. Each panel moves independently allowing free movement. TurtleSkin WaterArmor gives you the protection of 100% Kevlar™ fiber from DuPont with a 100% polypropylene cover fabric designed to resist punctures, cuts, and abrasions. A rugged outer layer also provides chemical resistance and is easy to clean for low maintenance.

All Jetting’s USA manufacturing facility produces high pressure hose fittings as well as a large selection of ultra high pressure hose fittings, adaptors, and UHP hose couplers. Our UHP hose couplers connect hoses to each other or to the waterblasting pumps.

Our complete line of fittings and adapters is made with 316 stainless steel for corrosion resistance. These products include:

• 3/8″ female coupler with collars and glands
• 7/8″ type M x 9/16″ HP fitting
• 7/8″ type M x 9/16″ type M fitting
• 7/8″ x 7/8″ type M fitting
• 9/16″ x 9/16″ type M fitting
• 9/16″ type M fitting x 3/8″ HP fitting
• 9/16″ female coupler with collars and glands
• 9/16″ HP x 3/8″ HP reducing coupler

All Jetting Technologies is a distributor for Parker Hannifin high pressure and ultra high pressure (UHP) waterblast hose. We stock a complete line of high-pressure waterjet hoses for all popular working pressures. Waterjetting hose are stocked in 15′, 50′ and 100′ lengths (4.6 m, 15.2 m and 30.4 m), and custom lengths and fittings are available and can be drop shipped to your facility.

The UHP line of high pressure hose includes hoses that are rated at pressures of 40,000 – 55,000 psi (2,800 -3,792 bar).

When requesting a quote, please specify the length of hose and fittings that you require for your surface preparation project.

Our line of ultra high pressure hoses include

• 15′, 40k, 5mm with 3/8″ HP with burst shield
• 15′, 55k, 5mm with 9/16″ type M with burst shield
• 50′, 40k, 5mm with 3/8″ HP with tough jacket
• 50′, 40k, 5mm with 9/16″ type M with tough jacket
• 50′, 40k, 8mm with 7/8″ type M with tough jacket
• 50′, 40k, 8mm with 9/16″ HP with tough jacket
• 50′, 55k, 5mm with 3/8″ HPTN with tough jacket
• 50′, 55k, 5mm with 9/16″ type M with burst shield
• 50′, 55k, 8mm with 7/8″ type M with burst shield

All Jetting manufactures multiple high performing and affordable waterjet sapphire nozzles, nozzle tips and waterblasting nozzle carriers.

Our complete line of HP and UHP sapphire nozzles are manufactured with high polished Swiss sapphire jewels for increased cutting and cleaning power. The durability and quality of our nozzle will give you high performance on your water blasting jobs, and all at an incredible economical price. We offer free samples of our nozzles – just contact us with the orifice size and nozzle type needed for your waterjetting project.

We also produce full line of surface nozzle carriers for air rotational gun work and tube cleaning,

The most popular sapphire nozzles are:

• 1/4″ sapphire nozzle
• 3/8″ sapphire nozzle
• 5/16″ sapphire nozzle
• 7/16″ sapphire nozzle
• Bi-mode sapphire nozzle
• M10 sapphire nozzle

All Jetting’s rotating waterblasting jetlance gun can operate up to 55,000 psi (3,790 bar) for your surface preparation project.

The jetlance is powered by a 4,800 rpm air drill – the fastest on the market – for optimum waterjet cleaning and surface prep. This amazing rotation speed of the air drill and the force of the water powers the waterjetting nozzle head for superior coating removal and cleaning.

All Jetting’s hydroblasting jetlance is available in 5 standard lengths with a modular lance and shroud system allowing users to quickly convert between sizes according to their job.

We know your time is valuable so our watejetting jetlance is made for efficiency.

Jetlance spare parts and sapphire waterjet nozzle tips are made here in the USA with the highest quality material. Our prices are more than reasonable and our parts are in stock so we will help you increase the profit of your water blasting project